Skip to content

American Stainless M1.0T11G-JL1 Motor, 1 HP, 3,420 rpm, 56J, 115/230V

UPC: | Harmonization (Schedule B): 8501.40.5040

Original price $728.89 - Original price $728.89
Original price
$728.89 - $728.89
Current price $728.89
Pump Motor, Bearing Protection Water Slingers, Body Dia. 5.5 in, Bolt Circle Dia. 5 7/8 in, Conduit Box Location Exterior, Conduit Box Position F3, Duty Cycle Continuous, Finish Powder Coated, For Pump Number FDP1AL, FDP5AL, Frame 56J, Hz 60, Full Load Amps 9.6/4.8 A, Height 7 3/4 in, HP 1, Ins. Class F, Inverter Rated No, Length Less Shaft 6 1/2 in, Manufacturers Warranty Length 1 yr, Max. Ambient Temp. 40 Degrees C, Max. SF Amps 9.3/4.8 A, Motor Application Pump, Motor Bearings Ball
Voltage 115V AC
No. of Speeds 1
Conduit Box Position F3
Part Winding Start Capable No
Phase Single
Bearing Protection Water Slingers
Standards CSA (C22.2 No 77), CSA (C22.2 No. 100), UL (1004-1), UL (1004-3)
Motor Mounting Type Face
Duty Cycle Continuous
Usable @ 200V No
Motor Mounting Position Horizontal; Vertical Shaft Down
Frame 56J
Usable @ 208V No
Motor Frame Material Cast Aluminum
Motor Enclosure Design Totally Enclosed Fan-Cooled
Motor Service Factor 1.2
Number of Wires 3
For Pump Number FDP1AL, FDP5AL
Nameplate RPM 3,420
Inverter Rated No
Max. SF Amps 9.3/4.8 A
Max. Ambient Temp. 40 Degrees C
Nominal Efficiency 74.1 %
Motor Design Permanent Split Capacitor
Motor Bearings Ball
RPM Range 3,001-3,600
Full Load Amps 9.6/4.8 A
Ins. Class F
Voltage Compatibility 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC
Weight 17 lb
Motor Shaft Rotation CCW
HP 1
Hz 60
Regreasable Bearings Permanently Lubricated Bearings
Motor Thermal Protection Auto
Finish Powder Coated
Motor Shaft Design Threaded
Conduit Box Location Exterior
Overload Relay Required No
Shaft Material 303 Stainless Steel
Motor Sub Application Vertical Pump
Motor Application Pump