Skip to content
Privacy Policy Return Policy Contact Us
WEG 02018XT3E256TC W21 Explosion - proof Motor NEMA Premium Efficiency 20 HP 4P 256TC 3Ph 230/460//380 V 60//50 Hz IC411 - TEFC - Foot - mounted - KVM Tools Inc.KV02018XT3E256TC

WEG 00718XT3E213TC W21 Explosion-proof Motor NEMA Premium Efficiency 7.5 HP 4P 213/5TC 3Ph 230/460//380 V 60//50 Hz IC411 - TEFC - Foot-mounted

UPC: 909492414770 | Harmonization / Schedule B : 8501.52.4000

Country of Origin: United States | Shipping Weight: 225.21

$2,852.59 - $2,852.59
$2,852.59
$2,852.59 - $2,852.59
$2,852.59
WEG Explosion-proof motor was especially designed to operate in environments with the presence of explosive atmospheres. It has robust construction, a flame retention system with gaps between the parts carefully designed, accurate machining on the terminal box and screws with high mechanical strength. It meets the requirements of explosive atmospheres like Division I/Zone 1. Motors are certified for VFD service.

Electric Motors

Frame 213/5TC
Output 7.5 HP (5.5 kW)
Number of Poles 4
Frequency 60 Hz
Rated speed 1765 rpm
Slip 1.94 %
Rated voltage 230/460 V
Rated current 18.8/9.41 A
L. R. Amperes 126/63.0 A
LRC 6.7x(Code H)
No load current 6.80/3.40 A
Rated torque 22.3 ft.lb
Locked rotor torque 210 %
Breakdown torque 280 %
Locked rotor time 21s (cold) 12s (hot)
Moment of inertia (J) 1.38 sq.ft.lb
Design B
Insulation Class F
Service factor 1.15
Temperature rise 80 K
Duty Cycle Cont.(S1)
Starting Method Direct On Line
Ambient temperature -20°C to +40°C
Altitude 1000 m.a.s.l.
Degree of Protection IP55
Enclosure IC411 - TEFC
Mounting F-1
Rotation¹ Both (CW and CCW)
Noise level² 58.0 dB(A)
Approx. weight³ 209 lb
(1) Looking the motor from the shaft end.; (2) Measured at 1m and with tolerance of +3dB(A).; (3) Approximate weight, subject to be changed after manufacturing process.; (4) At 100% of full load.

Efficiency

50% 75% 100%
90.2  91.0  91.7 

Power factor

50% 75% 100%
0.60  0.73  0.80 

Features

Frame Material Cast Iron 
Impregnation Method Dip and Bake Polyester 
Main terminal box hole NPT 1" 
Terminal Block Without 
Shaft Locking Device Without 
Shaft Material SAE 1040/45 Carbon Steel 
Painting RAL 5009 202P (ISO 12944 - C4) 
Grounding Lugs Single 
Fan Cover material Steel 
Tropicalized Painting Without 
Bearing cap Yes- Bearing Cap 
Bolt Material Carbon Steel 
Winding thermal protection Thermostat - 2 wires 1 per phase 155°C 
Balancing Method 1/2 Key 
Drip Cover Without 
Overload protector (phenolic) Without overload protector  
Connection Cables Quantity 9 
Fan material Plastic 
Screw cap STAINLESS STEEL AISI 316L 
NDE bearing Seal Lip Seal 
DE bearing Seal Oil Seal