Fasteners

Bend this wire and it will stay put. Frequently used as tying wire and locking wire, 304 stainless steel is a good all-around choice for a wide...

Lock the ends of clevis pins and shafts to keep components in place. Slide these cotter pins into a hole and then bend the prongs outward with plie...

Lock the ends of clevis pins and shafts to keep components in place. Slide these cotter pins into a hole and then bend the prongs outward with plie...

Lock the ends of clevis pins and shafts to keep components in place. Slide these cotter pins into a hole and then bend the prongs outward with plie...

Lock the ends of clevis pins and shafts to keep components in place. Slide these cotter pins into a hole and then bend the prongs outward with plie...

Use these staples in air-powered, electric, cordless, and manual staplers. Stainless Steel—Stainless steel staples have excellent corrosion resista...

Lock Nut, Finish Zinc Plated, Hex Height 7/32 in, Hex Type Standard Hex Center Lock, Hex Width 7/16 in, Lock Type Center Lock Distorted Thread, M...

Spring Nut, Nut Shape U Style Spring Nut, Nut Finish Phosphate, Nut Material Steel, Minimum Panel Thickness 0.025 in, Maximum Panel Thickness 0.15...

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head. Metr...

More corrosion resistant than stainless steel, nickel alloy set screws have excellent resistance to salt water and some acids. They have a thin...

Standard U-Bolt, Standard U-Bolt, Steel, Finish Hot Dipped Galvanized, Thread Size 1/2 In.-13, Thread Length 3 in, Inside Length 7 13/16 in, Insi...

Standard U-Bolt, Standard U-Bolt, Stainless Steel, Finish Plain, Thread Size 1/2 In.-13, Thread Length 2 in, Inside Length 8 3/8 in, Inside Width ...

Flat Washer, Flat Washer Type Standard, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, ...

Hex Nut, Hex Type Standard Hex, Finish Zinc Plated, Material Grade/Class Grade 2, Material Steel, Thread Size 1/4 In.-20, Hex Width 7/16 in, Hex H...

USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, For Sc...

Flange Nut for 4.5", 5" and 6" Wheel Diameter DeWalt Grinder for Grinding Wheels and Sanding Discs For Grinder Manufacturer DeWalt For ...

Flange Nut for Dwe4517 and Dwe4519 DeWalt Grinder for Grinding Wheels and Sanding Discs For Grinder Manufacturer DeWalt For Manufacture...

Disassemble components frequently without losing tension in the pin. The coil preserves holding strength, so you can reuse these pins over and over...

Cotter Pin,3/32 in dia,2 in L,PK50, System of Measurement Inch, Pin Diameter 3/32 in, Pin Type Extended Prong, Material Stainless Steel, Material...

Cotter Pin,3/32 in dia,1.5 in L,PK50, System of Measurement Inch, Pin Diameter 3/32 in, Pin Type Extended Prong, Material Stainless Steel, Materi...

Cotter Pin,0.25 in dia,4 in L,PK50, System of Measurement Inch, Pin Diameter 1/4 in, Pin Type Extended Prong, Material Steel, Material Grade/Clas...

Cotter Pin,1/8 in dia,3 in L,PK100, System of Measurement Inch, Pin Diameter 1/8 in, Pin Type Extended Prong, Material Steel, Material Grade/Clas...

Cotter Pin,3/8 in dia,3.5 in L,PK50, System of Measurement Inch, Pin Diameter 3/8 in, Pin Type Extended Prong, Material Steel, Material Grade/Cla...

Cotter Pin,5/16 in dia,3 3/10 in L,PK25, System of Measurement Inch, Pin Diameter 5/16 in, Pin Type Extended Prong, Material Steel, Material Grad...