| Application |
Ideal for Sealing All Types of Flanges Including Stamped Sheet Metal Covers Where Water-Glycol Resistance is Required |
| Color |
Gray |
| Substrates |
Metal, Plastic |
| Temp. Range |
-75 to 625 Degrees F |
| For Use On |
The Product is Designed Primarily for Flange Sealing with Excellent Oil Resistance or Rigid Flange Sealing for Example on Transmissions and Cast Metal Housings |
| Sealant Base |
Silicone |
| Sealant Container |
Cartridge |
| Item |
RTV Gasket Maker |
| Type |
Oil and Water-Resistant, Noncorrosive |
| Full Cure |
24 hr |
| Begins to Harden |
30 min |
| Flash Point |
199.4 Degrees F |
| Characteristics |
Low Odor, Low Volatility, Noncorrosive, Oil and Water Resistant |
| Specific Gravity |
1.5 @ 20 Degrees C |
| Standards |
California Proposition 65CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, NSF Category P1, OSHA 29 CFR 1910.1200, TSCA |
| Container Type |
Cartridge |
| VOC Content |
49.65 g/L |
| Chemical Base |
Oxime Silicone |
| Tensile Strength |
348 psi |
| Full Cure Time |
1 day |
| Cure Type |
Room Temperature |
| Resistance Properties |
Oil Resistant |
| Sensor Safe |
No |
| Specific Sealing Application |
Flexible Assemblies |
| Working Time |
30 min |
| Hardness |
Shore A75 |
| Non-Hardening |
Yes |
| For Material Type |
Metal, Plastic |
| Sealant Type |
Gasket Maker |
| Series |
SI 5699 |
| Maximum Operating Temperature |
400 Degrees F |
| Product Form |
Paste |
| Storage Requirements |
8 Degrees to 21 Degrees C |
| Minimum Operating Temperature |
-65 Degrees F |
| Features |
Non-Corrosive |
